粘结剂喷射3D打印制备的AlCoCrFeNi 2.1高熵合金的微观组织演变与力学性能
《Intermetallics》:Microstructural evolution and mechanical properties of AlCoCrFeNi
2.1 high-entropy alloys produced by binder jetting 3D printing
【字体:
大
中
小
】
时间:2026年10月21日
来源:Intermetallics 5.3
编辑推荐:
## Summary of the Paper
This study investigates the sintering behavior and mechanical performance of **AlCoCrFeNi?.? eutectic high-entrop
## Summary of the Paper
This study investigates the sintering behavior and mechanical performance of **AlCoCrFeNi?.? eutectic high-entropy alloy (EHEA)** produced by **binder jet 3D printing (BJ3DP)**, comparing **conventional vacuum sintering** with **thermal-electric coupled sintering (TECS)**.
---
### Key Contributions
| Aspect | Details |
|--------|---------|
| **Motivation** | Low green density of BJ3DP AlCoCrFeNi?.? makes full densification difficult without excessive grain coarsening |
| **Comparison** | Conventional sintering at 1270, 1350, 1360 °C vs. TECS at 1350 °C (5 A DC current) |
| **Main Finding** | TECS at 1350 °C improves both strength and ductility without needing to raise the temperature to 1360 °C |
---
### Key Results
1. **Phase constitution:** All samples retained the FCC/BCC dual-phase structure; no additional crystalline phases were detected by XRD.
2. **Conventional sintering:** Increasing temperature reduced porosity but caused marked grain coarsening and bimodal grain-size distribution at 1360 °C.
3. **TECS at 1350 °C:** Produced a more uniform granular FCC/BCC microstructure with Cr-rich BCC nanoparticles (~50 nm) in Ni-Al-rich BCC regions.
4. **Mechanical properties (TECS vs. conventional at 1350 °C):**
| Property | Conventional | TECS |
|----------|-------------|------|
| Yield strength | 532 MPa | **692 MPa** |
| Ultimate tensile strength | 949 MPa | **1164 MPa** |
| Elongation to fracture | 10.6 % | **13.7 %** |
5. **Strengthening mechanisms (TEM):** Dislocation tangles and stacking faults in FCC, dislocation pile-ups at FCC/BCC interfaces, and dislocation interactions with Cr-rich nanoparticles — all contributing to increased slip resistance and strain hardening.
---
### Significance
TECS provides an effective **pressureless** route to enhance tensile performance of BJ3DP EHEAs by promoting mass transport while limiting excessive thermal exposure — avoiding the need for higher sintering temperatures that lead to microstructural degradation.
Would you like me to go deeper into any specific section or aspect of this paper?
生物通微信公众号
生物通新浪微博
今日动态 |
人才市场 |
新技术专栏 |
中国科学人 |
云展台 |
BioHot |
云讲堂直播 |
会展中心 |
特价专栏 |
技术快讯 |
免费试用
版权所有 生物通
Copyright© eBiotrade.com, All Rights Reserved
联系信箱:
粤ICP备09063491号